Kaplan & Tubular Turbine
Kaplan Turbine is suitable for medium & low water head and large flow power plants. With same water head, the Kaplan runner speed is higher than that of the Francis'. The Kaplan runner blade can be either fixed and rotatory. The key components include: Kaplan runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, Draft tube, Spiral case.
Tubular Turbines are suitable to lower water head, is a kind of horizontal turbine with straight flow channel. There is no spiral case in Tubular turbine, and its blades can be fixed or rotatory. The key components include: Tubular runner, Distributor, Turbine guide bearing, Governor among other.
Our Kaplan &Tubular Turbine has the features with Kaplan Turbine Design, Kaplan Turbine Advantages. Best quality and factory price will give you
Application scope:
| |
Kaplan turbine |
Tubular Turbine |
| Water Head: |
3 ~ 80m |
2 ~ 25m |
| Output: |
0.1 ~ 200MW |
0.05 ~ 57MW |
| Frequency: |
50/60HZ |
50/60HZ |
| Runner Dia.: |
1 ~ 11m |
1 ~ 7m |
We also provide Casting Pelton Runner, Forged Pelton Runner, Casting Guide Vane, Francis Runner Band Heat Treatment, Pelton Turbine.
Product Introduction
1. Advanced CFD, FEA technic is utilized in the designing process to ensure better technical solution
2. CAE casting simulation is adopted for the produciton of casting parts, this advanced and reliable process plan could help effectively improve product quality.
3. All raw material strictly conform to international standard, such as ASTM, IEC,ISO etc. key component such as runners, guide vane is Forged and entire CNC machined.
Chemical Composition for ASTM A473 S41500 and ASTM A743 CA6NM(%)
| Material No. |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
| ASTM A473 S41500 |
≤0.05 |
≤0.60 |
0.5-1.0 |
≤0.030 |
≤0.030 |
11.5-14.0 |
3.5-5.5 |
0.40-0.80 |
| ASTM A743 CA6NM |
≤0.06 |
Max1.0 |
Max1.0 |
≤0.040 |
≤0.030 |
11.5-14.0 |
3.5-4.5 |
0.40-1.0 |
Mechanical Property for ASTM A473 S41500 and ASTM A743 CA6NM
| Material No. |
σ0.2(Mpa) |
σb(Mpa) |
δ5(%) |
ψ(%) |
Akv (J/cm2) |
HB |
| ASTM A473 S41500 |
≥620 |
≥795 |
≥15 |
≥45 |
≥50 |
≤295 |
| ASTM A743 CA6NM |
≥550 |
≥755 |
≥15 |
≥35 |
≥50 |
≤285 |
- With the help of 3D Assembling, through motion simulation, the entire organization interaction can be seen at a glance. This helped a great deal for parts processing and pre-installation.
- Each project will strictly follow manufacturying plan to ensure the delivery date.
- ISO 9001 Quality Management system is carried out to ensure better management control
Buy low price, high quality Hydraulic Turbine Generator, Hydro Turbine Runner, Water Turbine Hydro Power, 100kw Hydro Turbines, choose our products,Getai Hydropower is the leading factory & Company, Warmly welcome new and old customers to visit and patronize!More information please view here.
Your message must be between 20-3,000 characters!
